Keep your 2020 Corvette running smoothly and growling proudly for years to come. There’s nothing worse than rust or engine trouble with a sports car, so protect your investment and learn to protect your car from the elements. Shop for car covers, routine maintenance and learn how to care for your car cover. Don’t let your 2020 Corvette show signs of age, but keep it lovingly maintained with these products and maintenance steps.

Use an Indoor Car Cover in Your Garage

Sports cars deserve to be parked indoors. Don’t let your Corvette sit out in the rain or in direct sunlight, but find a cozy garage bay for your ride. For extra protection, pick up an indoor car cover. A high-quality cover is lightweight and custom-fit for your year of Corvette. A cover prevents dust, moisture and flying debris from scratching or spotting your paint job.

Pick up an Outdoor Cover

In emergency situations, there comes a time when your sports car must brave the elements. Thankfully, a custom outdoor car cover can shield your Corvette from rain, falling leaves, tree sap, and other contaminants. Pick up a cover that’s UV blocking so you don’t fade that beautiful paint job.

An outdoor cover isn’t a perfect solution, but it will prevent any scratches, UV damage, and light rainfall. Look for ways to keep your sports car stored indoors, particularly for long-term storage. Thankfully, this weather-resistance, breathable covers can handle the most common dangers to your paint job.

Wash and Wax Your 2020 Corvette

Routine washing and waxing protect automotive paint from wear. Washing removes dirt and contaminants that may scratch, stain or fade your paint. Waxing provides a reliable coating that is scratch, smudge and fade resistant.

In between washes, pick up a premium car duster. These handy tools don’t require water or soap and wipe off any dust or light debris that may otherwise damage your paint or diminish from the flawless look of your ride.

Get a Tune-Up and Oil Change

If you don’t drive your Corvette daily, it can be difficult to remember routine maintenance steps. Your sports care requires the same routine maintenance as your daily commuter, so be sure to keep up on changing your oil and other maintenance tasks. Stop by a reliable mechanic to ask about a tune-up or other preventative maintenance.

Check Out Your Brake Pads, Battery and Other Maintenance

Even a Corvette needs a new set of brakes once and awhile. Don’t let grinding, inefficient brakes hold your ride back, but keep up on other maintenance tasks that aren’t as common. Inspect your brakes, battery, muffler, and tires for signs of wear and pull into your trusted auto shop for a full-service repair.

Keep your Corvette Safe

Don’t wait until your sports car gets scratched and dinged before you protect it from the elements and the outdoors. Paint touch-ups and bodywork can be costly repairs, so invest in affordable Chevy Corvette car covers today to stay safe wherever you drive. Keep it covered in your garage and take an outdoor cover with you when you park at work for the ultimate in complete car protection.

As the age of a vehicle increases, the maintenance costs and depreciation also increase significantly. This replacement journey becomes a hectic job for the rookie fleet managers on the field.

On average, the vehicle replacement cycles last three to four years. The mileage will vary between companies according to the fleet policy – it can cover anywhere between 30,000 miles to 120,000 miles over four years.

Since it is your responsibility as a fleet manager to address the inefficiencies of an old vehicle, introducing or revamping your fleet vehicle replacement strategy can save you all the hassle.

This article provides a complete guide to vehicle replacement cycles that help you operate your fleet as smoothly as possible.

Why Does Your Fleet Need Vehicle Replacement Cycles?

Regardless of the method you use to procure vehicles, optimization is necessary for understanding the nuances of your fleet life cycle and thus make an appropriate decision in repairs and upkeep.

Here’s what optimized replacement cycles for your fleet offer your business in the long run:

Reduced Downtime And Repair Costs

Forward-thinking companies are beginning to take notice of fleet replacement cycles to lower their preventative maintenance costs and increase their resale values.

If you would like to replace a few older vehicles in your fleet, following a fixed timeline will ensure you do so before the truck stalls or undergoes breakdowns out of warranty.

Replacing older trucks before major problems arise also decreases losses due to downtime, thereby improving efficiencies across fleet operations.

Increased Productivity

Fleet managers understand that modern vehicles will enable truckers to be more productive. The technological improvements and overall comfort of the latest models will drive fleet operators to perform better at work.

Thus, by determining a proper cycle for fleet management, managers can offer employees the ideal support they anticipate and deserve, thus keeping productivity levels high.

Enhanced Security

Extending your fleet’s life cycle beyond their capacity and quietly suffering through their deteriorating efficiencies means missing out on safer vehicles for your drivers.

Getting trucks with more advanced safety features like forward-collision warning systems and automatic emergency braking keeps your drivers happy and your assets secure.

Lower Fuel Use

Excessive fuel use is not a desirable thing for fleet organizations: it piles on to the company’s operating expenses and also harms the environment.

Vehicle replacement cycles ensure that older vehicles consuming too much gasoline and not offering peak performance are replaced by new vehicles with better miles per gallon.

How To Finalize The Best Vehicle Replacement Strategy

Determining a replacement cycle for your fleet could lead to long-term savings. However, designing a detailed vehicle replacement strategy can be both daunting and overwhelming.

If you have lost all hope of seeking out the most beneficial replacement cycle for your fleet and don’t know where to start, we’ve got you covered with these simple tips.

Look At Vehicle Specifics

Start by looking at the typical categories:  the number of years you’ve owned the truck, the mileage, monthly/annual repair costs, and the model of the vehicle.

Factor in extras like installing driver cams and custom-made features. These accessories add to your replacement costs should you need to install them in your new vehicle, too.

Turn To Fleet Tracking Devices

If you haven’t already, you should get started on fleet tracking and telematics by installing GPS devices.

The data from these devices can give you key insights into vehicle performance and point towards specific issues that may influence your final decision.

The tracking system collates and creates a simple report, so you get an overview of your vehicle’s annual maintenance expenses, fuel efficiency, compliance with inspections and safety regulations, and downtime.

Change Your Perspective

In a bid to reduce net costs, fleet managers might opt for an extended replacement cycle. They may delay buying newer models or prolong their lease terms to make the vehicle last longer.

Postponing replacement might seem like the cheaper alternative now, especially from a corporate vehicle budgeting standpoint. But interestingly, this strategy is more likely to increase your costs.

Older vehicles come with higher maintenance costs, and finding manufacturer-approved parts for outdated models is also next to impossible. Plus, these trucks may be out of warranty.

Since these factors often add to your overall fleet maintenance expenses, the winning strategy, in the long run, is to replace older trucks with newer, more efficient, and more advanced vehicles.

Vehicle Manufacturer Incentives

Speaking of financial savings, some vehicle manufacturers provide customers with incentives to get them to buy their newer products. These incentives include exclusive lease offers and discounts.

Fleet managers considering getting a new vehicle should take advantage of these aggressive deals to give their fleet a much-needed facelift. Competitive pricing can prove beneficial for your replacement strategy.

Tune Into The Needs Of Your Business

Apart from maintenance costs, it is prudent to create your vehicle replacement policies with the requirements of your business in mind.

If you’ve noticed that some vehicles in your fleet are more often than not left unutilized, chances are you don’t need as many trucks to keep your fleet operations running smoothly.

This stands in contrast to fleets that have too few vehicles and might be overworking their trucks (and drivers) to the point of impacting their resale value down the line.

Even if you’re satisfied with your current vehicle distribution, you may need a bigger fleet size one day, so consider your unique business needs and determine replacement cycles accordingly.

Concluding Comments

Remember: an older, inefficient fleet merely undermines the sacrifices you’ve made up until this point to keep your company at the vanguard and lower its operating costs.

Devising a replacement cycle strategy that complies with your business and investing in competent vehicles is the way to grow your fleet business as quickly as possible.

Managers can use fleet management software to determine the performance and utility of their existing vehicles and analyze which strategy offers the best returns on investment.

It’s best to update yourself with the right knowledge of newer truck models, competitive pricing and incentives, and technology systems that can give you access to a robust and productive fleet.

tetrate series venturesshiebertechcrunch Tetrate Series Venturess is a new startup that is shaking up the tech world. They are a group of women who are passionate about technology and are determined to make a difference. They have already made waves in the industry by being one of the most diverse and inclusive companies around. And they are just getting started. tetrate series venturesshiebertechcrunch

In the summer of 2014, a small team of engineers and entrepreneurs from Google, Facebook, and Twitter came together to form a new company called Tetrate. Their mission was to make it easier for companies to adopt and use microservices, a new way of building software that was becoming increasingly popular.

Tetrate quickly raised $1.5 million in seed funding from some of the biggest names in Silicon Valley, including Andreessen Horowitz and Google Ventures. tetrate series venturesshiebertechcrunch

The tetrate series venturess is a new type of computer that has been designed to be more powerful and efficient than any other on the market. This new machine is the result of years of research and development, and it promises to revolutionize the way we use computers. The tetrate series venturess is faster, more reliable, and more energy-efficient than any other computer on the market, and it is sure to change the way we live and work. tetrate series venturesshiebertechcrunch